Wallas DT/GB Heater Controller on an ESP32C3
============================================

## Getting Started

As described in the chapter on Risc-V target installation in the [Rust on ESP Book](https://docs.esp-rs.org/book/installation/riscv.html),
you should install the ESP32c3 target for your rust toolchain by doing:

```bash
rustup toolchain install stable --component rust-src
rustup target add riscv32imc-unknown-none-elf
```

Now checkout this project.
It is advised to run the `--release` version of the application, thus to build and run, do:

```bash
cargo build --release
cargo run --release
```

Currently the application will not discover wireless network and do configuration of it; a known network, along with
encryption key is compiled into it - therefore, before building, run this and set the information: network name, network password
and desired log level:

```bash
. ./set-env.sh
```